Introducing controllable-device tariffs to enhance grid stability

German operators can briefly limit heat pumps and EV chargers in emergencies, guaranteeing a 4.2 kW minimum, while customers get reduced network fees.

About this good practice

Since 1 January 2024, the rules set by the Bundesnetzagentur (Federal Grid Agency) under Section 14a of the Energy Industry Act (§14a EnWG) have allowed distribution network operators to temporarily reduce the consumption of controllable consumer devices, such as heat pumps and private EV charge points, when there is an acute threat of damage or overloading on their networks. In return, operators can no longer refuse or delay connecting these devices on the grounds of possible local bottlenecks. Interventions must rely on objective criteria from real-time state estimation, and operators must guarantee a minimum supply of 4.2 kW, enough to keep a heat pump running or, in most cases, to charge an EV for a 50-kilometre drive within two hours. Devices cannot be switched off completely, and standard household electricity is unaffected.

In exchange, consumers receive a reduced network tariff, applying a distinct, favourable tariff to specific flexible assets even where the household’s wider load is not on a dynamic tariff. They can choose between three modules: a general annual discount of EUR 110-190 (gross) depending on the network area (Module 1); a 60% reduction in the unit price, which requires a separate meter and suits heat pumps (Module 2); or, from 2025 and combined with Module 1, a time-variable network tariff with lower prices when demand is low (Module 3). Consumers can also let the operator control each device directly or set an overall maximum consumption and coordinate their devices through an energy management system, taking self-generated electricity into account. Operators must publish details of their interventions on a joint internet platform and factor expected interventions into network expansion planning.

Read more about the good practice

Want to learn more about this best practice? Follow the links below.