Operate

Mandate expanded medium-voltage observability and control systems

Start distribution visibility at medium-voltage substations and feeders, where each sensor resolves the most operational uncertainty.

About this measure

Regulators should require deployment of monitoring systems at the medium-voltage level, covering primary and secondary substations and feeders. These systems allow real-time measurement of flows, voltages and equipment status, power-quality monitoring and the communication that brings these measurements into operational systems. Medium voltage comes first because it is where visibility per sensor is highest and where most distributed generation and larger new loads connect, so a comparatively small deployment resolves the largest share of operational uncertainty. The resulting data are fed into the system operator’s state-estimation process and the grid models addressed later in this recommendation. The low-voltage expansion that follows builds on the same platforms. Phase the deployment process by constraint and uptake, consistent with the targeted logic of the metering roll-out in this recommendation.

Core recommendation for this measure

Operate

5.2 Activate the distribution layer


Distribution grids were built as the last mile of a one-way power system, delivering energy to…

Related recommendations

Deploy

4.2 Streamline connection management


Connection timelines are one of the main constraints on renewable deployment and electrification,…

Deploy

4.3 Reward flexibility with better connection terms 


Most systems grant firm, worst-case connection rights, reserving capacity for conditions that…

Accelerators for this measure