Objective

Operate

5. Modernise operations

Power systems were built to be run from a small number of large dispatchable generators, with power flowing one way to broadly predictable demand and little need to monitor conditions on the distribution grid. Current growth in variable renewables, distributed energy resources and electrification fundamentally challenge these assumptions. Where operations do not keep pace, operators fall back on conservative assumptions that leave capacity unused, weaken reliability and stability, and force the use of more costly planning and operational measures. This objective calls for the bulk system to be operated flexibly and securely, for the distribution layer to be actively managed and for existing assets to be used more optimally.

Why this objective matters

The task of operating a power system is changing fundamentally. Power systems were built to be run from a small number of large dispatchable generators, with power flowing one way to broadly predictable demand and little need to see or steer conditions on the distribution grid. Variable renewable generation, bidirectional flows, distributed energy resources and the electrification of industry, transport and buildings drastically revise these conditions. Operating conditions now change more rapidly and require more frequent interventions in more places than the practices of conventional operation were built to handle. How effectively operational practices adapt to evolving conditions will determine whether the system stays secure and how effectively the grid is utilised.

Where operations do not keep pace, costs rise and reliability suffers. Under new conditions in the bulk system, practices calibrated for dispatchable generation leave operators holding larger reserve margins and dispatching conservatively. Stability becomes harder to maintain as inverter-based resources displace synchronous machines. In the distribution grid, visibility is thin or absent, so operators fall back on worst-case assumptions that leave more capacity unused and make congestion, voltage problems and faults harder to detect and resolve.

At the same time, distributed energy resources capable of supporting the system cannot be called on to do so, even as a growing share of the system’s supply and flexibility connects at this level and electrification increases the need for distribution investment. Across both layers, overly static limits and manual practices leave existing assets underutilised, resulting in grid reinforcement where more flexible use of the existing infrastructure could have sufficed.

Modernising operations is a fast lever for increasing the usable grid capacity, and the foundation for more flexible and secure system operations. Many operational measures can be put in place in months to a few years, well within the lead times of new grid infrastructure. Most rely on mature commercially available technology, indicating that the main required actions lie in the policy and regulatory domain. The gains extend beyond greater utilisation of existing grid capacity – a well-run system is more secure and resilient. It is also the precondition for several other objectives: alternatives to expensive reinforcement can only be incorporated in planning once it is certain that system operators can reliably call upon them, new connections can only be granted with smaller operating margins where the grid is well observed and actively managed, and flexibility can be mobilised only where system needs are grounded in granular operational data and matched by reliable control.

What’s at stake

Security

Competitiveness

Affordability

What this objective calls for

This objective modernises operations across the transmission and distribution layers of the system: how the bulk system is run, how the distribution grid is brought into active operation, and how much is extracted from the assets the operator already owns or directly controls. Taking each in turn:

1. Operate the bulk system flexibly and securely. The bulk system’s task has changed. Instead of serving a predictable demand curve, it now has to meet a more variable residual demand curve. While certain operational tasks will be increasingly taken up or supported at the distribution level, the transmission layer will still have to perform the functions that cannot be devolved downwards, such as system stability and system restoration. This requires, among other things:

• operational protocols updated for variability

• better forecasting, scheduling and dispatch closer to real time

• maintaining digital models of the transmission system, emergency preparedness and operational cybersecurity, and

• real-time stability management as inverter-based resources increasingly displace synchronous generation.

2. Activate the distribution layer. Distribution grids must move from being the passive last mile of the power system to being its actively operated first mile. This requires knowing what is connected, extending metering and observability from medium into low voltage, maintaining digital models of the distribution grid, automating management and decision support, coordinating operationally across the transmission–distribution boundary, and ultimately establishing the distribution system operator as an active system operator in its own right.

3. Optimise the use of existing infrastructure. Across both layers, more has to be extracted from assets already owned or contracted by the system operator. This requires dynamic ratings in place of static worst-case limits, regulatory incentives that reward efficient use, grid-enhancing technologies and active grid management, upgrading of existing lines within their current corridors, predictive maintenance, potential flexibility retrofits and contract restructuring for dispatchable plants, and curative congestion management.

Policy recommendations

Operate

5.1 Operate the bulk system flexibly and securely


The bulk system faces change from both the supply and the demand side. Variable renewables are…

Operate

5.2 Activate the distribution layer


Distribution grids were built as the last mile of a one-way power system, delivering energy to…

Operate

5.3 Optimise the use of existing infrastructure


Grid assets and contracted generation are routinely operated below their safe technical capability,…